Coming Soon!

A SIMPLE but quite versatile Power Board to provide power for the different LEDs you will want to install on your rolling stock.

This board gets power from the track via insulated trucks and wipers (that you supply) and incorporates a bridge rectifier, voltage regulator, current limiting resistors - for several types of LEDs or voltage used - and a capacitor to make sure the lights stay on - even if you hit a dirty section of track.

There are TWO (2) LED connections for each resistor (220 ohms and 470 ohms) installed so you can have different lighting tasks at different brightness levels. If you know a specific task requires a different resistance, there will be a variable resistor / potentiometer with a third pair of LED connections.

A new feature is a simple flasher that will allow you to use a single LED for a FRED / EOT light.

This board is 2.6 x .56 inches